Issue StoriesInvasive Pulmonary Testing: Bronchoscopyby William C. Pruitt, CPFT, RRT The RT must have the capability to anticipate each step in bronchoscopy, including good assessment skills to detect changes in the patients condition during the procedure.
Reasons for Bronchoscopy Therapeutic bronchoscopy procedures are performed to remove retained secretions or plugs of mucus; remove foreign bodies; perform difficult intubations; excise small tumors or polyps in the tracheobronchial tree; dilate a stenotic airway or reinflate areas of atelectasis; stop hemoptysis; employ brachytherapy, cryotherapy, laser therapy, or photodynamic therapy; or place stents in the airway.1,2 Bronchoscopes are either rigid or flexible. Rigid bronchoscopes are stainless-steel tubes that are inserted under general anesthesia through the mouth of the patient and into the right or left main stem bronchus. Rigid bronchoscopes allow direct visualization, and the physician can take photographic or video images. A rigid bronchoscope is 40 cm long and has a diameter ranging from 9 mm to 13.5 mm.3 Flexible bronchoscopes are inserted through the mouth or nose and, due to the flexibility of their tips, can be advanced farther into the lung (down to the lobar bronchi and some segmental branches). The flexible bronchoscopes used for adults are generally 3.4 mm to 6.2 mm in external diameter and have a suction channel from 1.2 mm to 3.2 mm.4 Pediatric bronchoscopes are 3.5 mm to 4 mm in diameter and slightly shorter than the adult bronchoscopes (about 450 mm to 550 mm in working length). An ultrathin bronchoscope ranges from 2.2 mm to 2.8 mm in diameter.5 Procedural sedation, rather than general anesthesia, is generally provided when a flexible device is used. Flexible fiber-optic bronchoscopes transmit the image to the eyepiece (or, with newer systems, use a miniature video system to show the image on a video screen). Patients undergoing fiber-optic bronchoscopy are given analgesia and sedation to make them comfortable, reduce pain, and reduce coughing, while allowing them to maintain spontaneous breathing. Rigid bronchoscopy is done in the operating room, while flexible bronchoscopy is most often done in a special procedure room; some fiber-optic bronchoscopy procedures are done at the patients bedside. A light source connects to either type of bronchoscope to provide a clear view of the distal airways.
Accessory Instruments, Lasers, and Agents Bronchoscopes have also been used to deliver cyanoacrylate glues that seal areas causing hemoptysis.7 Miniaturized ultrasound probes have been used to examine the pulmonary tree and parenchyma. Endobronchial ultrasound has been used to stage bronchogenic carcinoma, to evaluate tumor infiltration in adjacent structures, and to differentiate between benign and malignant lesions.8 Angioplasty balloon catheters have been used with bronchoscopes to apply pressure on the bronchial wall and stop bleeding, or to open stenotic areas in the airway.1,5 Bronchoalveolar lavage uses a bolus of sterile saline to wash out a fluid sample from the distal airways and alveoli. The procedure involves inserting the tip of the fiber-optic bronchoscope until it wedges in an airway, injecting a bolus of 20 mL to 50 mL of saline, and then applying suction to retrieve the fluid. Another diagnostic tool is fluorescence bronchoscopy, which uses the same photosensitizing agents used in photodynamic therapy. When exposed to ultraviolet light, the abnormal tissue appears a different color than normal tissue. A similar technique involving fluorescence bronchoscopy uses a helium-cadmium laser and special filters to visualize abnormal tissues.6 Bronchoscopy is also used to place stents in the airway. Stents help stabilize airway collapse that is the result of bronchomalacia, and are used to reinforce an area after stenosis has been corrected by balloon or laser treatment.9 The RTs Role After the procedure, the RT may be responsible for cleaning the bronchoscope and testing it for leaks to ensure sterility, as well as setting up the room (or the portable cart) for the next bronchoscopy. Inventory and maintenance of supplies are other jobs that may belong to the RT. When a bronchoscope is damaged, the RT often prepares it for shipping, contacts the manufacturer or repair agent regarding the repair, and receives the repaired scope when it arrives. As new procedures are introduced, the RT must learn each procedure and acquire the skills and knowledge needed to become competent in assisting the physician, in addition to ensuring that the proper supplies are present. William C. Pruitt, CPFT, RRT, is an instructor, cardiorespiratory care, University of South Alabama, Mobile. References: |
|
|
Featured Jobs
Find a Job |
ADDITIONAL ONLINE RESOURCES |
Featured Employer
|